Help:Inline queries

Semantic MediaWiki includes a simple query language for semantic search, so that users can directly request certain information from the wiki. Readers who do not wish to learn the query syntax can still profit from this feature: inline queries dynamically include query results into pages. So queries created by a few editors can be consumed by many readers.

Inline queries are similar to other semantic search features, and can also be restricted on a site in order to ensure sufficient performance. Since inline queries exploit the existing caching mechanisms of MediaWiki, most requests for a page with such dynamic contents can be served without any performance impact whatsoever.

Introduction to #ask

The basic way of writing an inline query is to use the parser function #ask. The query string and any printout statements are directly given as parameter, like in the following example:

{{#ask: [[Category:City]] [[located in::Germany]] 
| ?population 
| ?area#km² = Size in km²
}}

Here we query for all cities located in Germany, and two additional printout statements are used (a simple one and one with some extra settings). This displays the following result on a page:

It is common to put the query as the first parameter behind #ask:. All other parameters are separated by |, just like for other parser functions. The exact formatting of the inline query is not essential, but it is good to use line breaks to make it more readable to other editors. As with all templates, one line per parameter, starting with the | is most accepted in practice.

Note that all the arguments to the #ask: function are ignored by the page parsing, hence the above example does not add a category or a «located in» property annotation to this page. A few more things to note are:

• The pipe '|' symbol is used to separate the conditions from the property to display.
• The conditions for display are a single argument to the #ask function, so there are no '|' symbols between them.
• White space and line breaks can be used within the #ask function, SMW is fairly flexible there.
• The format of the results display changes when you request display of additional properties. SMW picks an appropriate default format for query results, but you also have detailed control of the appearance of query results.

Knowing the basics of query string and printout statements therefore is enough to write many kinds of queries. But there are many cases where the standard table output of a query may not be the best choice, or where further settings are desired (like the maximum number of results that should be displayed). For this purpose, inline queries have a number of other possible parameters that one can use to control their appearance in detail. The general syntax for #ask therefore is the following:

{{#ask: argument 1 | argument 2 | … }}

Most of this page explains the various arguments one may use in inline queries.

The #show parser function

A common usage of queries is to display only a single property value for a single page. For example, one could insert the population of Berlin into some article, and use a query instead of manual copying to achieve this. SMW has a special shortcut to make such queries simpler. For example, one can write

{{#show: Berlin | ?population}}

to display the population of Berlin (Result: «»). The function otherwise works like an inline query, and all parameters available for inline queries can also be used on #show if desired. The above function can also be written as an #ask query as follows:

{{#ask: [[Berlin]] | ?population = }}

Here the equality symbol assigns another label for displaying the property, and this label is empty. Without this, the result would display «Population:» before the actual number.

Standard parameters for inline queries

In general, an inline query is a request to find a number of pages that satisfy certain requirements. The query must answer three questions:

1. Which pages are requested? (query description)
2. What information should be displayed about those pages? (printout statements)
3. How should the results be formatted within the page?

The first two points are explained in their respective manual pages. The third point is important to smoothly include query results in pages, yet is largely independent of the first two. Without further settings, queries often produce tables like above or simple lists (if no additional printouts are used). An example of another possible format are bulleted lists, which one can create with the parameter format=ol:

{{#ask: [[Category:City]] [[located in::Germany]] 
 | ?Population
 | format=ul
}}

This will produce the following output:

SMW implements a wide variety of output formats for inline queries, and allows you to futher control results display using a MediaWiki template. The parameter format is one of the most important parameters for selecting the appearance of query results and will be explained in more detail below. The following table gives an overview of common parameters that can be used in basically all queries:

Parameter	Possible values	Description
format	a format name (see below)	selected output format; some formats allow further parameters (see #Result formats)
limit	non-negative number	maximal number of pages selected (in the case of a table: rows)
offset	number	where to start
sort	property name or a list of property names separated by ,	name of properties to use for sorting queries (see Help:Selecting pages)
order	ascending/asc, descending/desc/reverse, or a list of those if more than one property is used for sorting	defines how results should be ordered, only applicable if sort is used, ascending is the default (see Help:Selecting pages)
headers	show, hide	shows or hides the labels/headers used in some output formats such as «table», hide is default
mainlabel	plain text	title of the first column (the one with the page titles in it), default is no title; set to - to suppress printing the page titles
link	none, subject, all	defines which article names in the result are hyperlinked, all normally is the default
default	plain text	if, for any reason, the query returns no results, this will be printed instead
intro	plain text	initial text that is prepended the output, if at least some results exist
searchlabel	plain text	text for continuing the search (default is «… further results»)

In addition to the above, some formats have their own parameters that control special aspects of the format. These special settings are described in the documentation of each format.

Result limits and links to further results

You can set the parameter limit to restrict the maximum number of results that are returned. For example, the query

{{#ask: [[Category:City]] [[located in::Germany]]
  | limit=3
}}

displays at most 3 cities in Germany. Even if you do not specify a value for limit, SMW always applies some limit to the results a query returns. Depending on a site's settings, it might be possible to increase the number of displayed results by specifying a higher value for limit. However, there is usually a maximum limit that cannot be exceeded, set by the wiki administrator based on performance considerations.

Running the above query produces:

This shows that whenever a query does not display all results due to a limit, it will normally show a link to «further results». The text of this link can be modified by setting the parameter searchlabel. If the value of searchlabel is empty, then no link to further results appears. Some output formats (see below) never display the search link, or display it only if a searchlabel was specified.

An interesting application of limit and searchlabel is to display only a link to the results of a search, without showing any result inline. You achive this by specifying a limit of «0» or «-1». For instance, the query

{{#ask: [[Category:City]] | limit=0 | searchlabel=Click to browse a list of cities }}

displays: Click to browse a list of cities. this link will only appear if there are any results at all. In other words, SMW will still compute the query to check if there are any results. If this is not needed, or if a link should be shown in any case, one can use the limit «-1». SMW will then only print a link to further results, even if no results exist at all. This also saves some computation time on the server.

Introduction and default text

If no articles satisfy the conditions of a query, nothing is shown. This is sometimes a useful behaviour, but often certain texts should be shown or not shown depending on whether the query has results or not. For example, one may want the query to show an output of the following form:

Upcoming conferences: ISWC2008, IJCAI2007, …

where the list of conferences is generated by a suitable query. If the query (for whatever reason) would not return any results, the page would look as follows

Upcoming conferences:

which is not desirable. Two parameters exist to prevent this.

• default: this parameter can be set to a default text that should be returned when no results are obtained. In the above example, one would probably write something like

Upcoming conferences: {{#ask: ... | default=none}}

so that, if no result is obtained, the article will display

Upcoming conferences: none

• intro: this parameter specifies a text that should be prepended to the output of a query, but only if one or more results exist. In the above example, one could write

{{#ask: ... | intro=Upcoming conferences:_}}

so that, if no result is obtained, nothing will be printed at all. Note that we use «_» to encode the final space. This is needed for initial and final spaces in any parameter, since those are otherwise removed internally (this is always the case in MediaWiki and is not specific to SMW).

Both of the above solutions will show the intended output if results are found. It is also possible to combine both parameters if desired. The parameters can also include MediaWiki markup, such as links or templates, as long as this does not confuse MediaWiki in recognising the #ask function.

Also note that if the set of pages selected in a query is empty, no header row or blank line, not even any blank space, is produced. This can also be useful to «hide» queries that are not applicable. However, it is not recommended to insert great amounts of queries into every page, based on the assumption that this can do no harm since no output is generated. Indeed, answering queries requires much computational resources and should not be done without a purpose.

Using default texts for queries is also a good habit in general, since it may happen that a query will no longer have any results in some future, e.g. due to changes in the way the wiki organises its data. Such queries that once worked properly may be forgotten so that nobody notices the query on a page labouring to display nothing.

Sorting results

It has been explained in Help:Selecting pages that query results can be ordered by one or more properties. As explained there, Special:Ask has additional input fields to specify sort properties and ordering. In inline queries, sort properties are defined with the parameter sort, and the order can be set with the parameter order. The value of order should be ascending or descending, or one of the short forms «asc» and «desc», or «reverse». An example is the following query for the three largest cities in Germany:

{{#ask: [[Category:City]] [[Located in::Germany]]
 | ?Population
 | sort=Population
 | order=descending
 | limit=3
}}

As explained in Help:Selecting pages, sorting conditions may impose restrictions on the set of query results. In the above case, only German cities that have a value for population are considered. If more than one property is used for sorting, the parameters sort and order can be set to lists of property names and orders, repsectively, separated by commas. The following is an example:

{{#ask: [[Category:City]] [[Located in::Germany]]
 | ?State
 | ?Population
 | sort=State,Population
 | order=ascending,descending
}}

This query would return all German cities for which a state and population was specified. These results will be ordered by the name of the state they are located in (ordered alphabetically). Cities that are located in the same state will be ordered by their population, largest first («descending»).

Configuring labels/table headers

Queries that return more than just the selected articles (e.g. the population in the above example) will display labels that describe the various output fields. By default, the label just displays the name of the requested property, or the text «Category» if categories are displayed. Labels for properties normally display as a link to the respective pages in the Property: namespace.

In the table format, the labels appear as column headers. In other formats, the labels might appear right before the output fields. The texts used for these labels can be controlled as explained in Help:Displaying information, using the equality symbol after printouts. Example:

{{#ask: [[Category:City]]
 |?Population=
 | ?Area#km²=Size in km²
 | ?Category=Category memberships
 | format=table
 | default=nothing found in Category:City
}}

This query will produce: nothing found in Category:City

It is possible to use empty printout labels to have no label for a result column at all. In tables, however, the table header will still be shown even if all printouts use empty labels. To remove the header of a table completely, the parameter headers can be used. Two values are possible:

• show: display labels (default)
• hide: hide all labels and table headers

This setting works for tables as well as for other outputs. In the latter case, the value hide will hide all printout labels, even if they have a non-empty label set in the query.

Changing the first result column

Most queries by default display the actual result pagess in the first result position, e.g. as the first column in a table. The header of this column is usually blank. To change the label, or to hide the whole first column, the parameter mainlabel can be used. Normally, the text given to that parameter will simply be used as a header for the first column, for example in the query

{{#ask: [[Category:City]] [[Located in::Germany]]
 | mainlabel=City
 | ?Population=Number of inhabitants
 | limit=3
}}

This will produce the table:

The parameter mainlabel can also be used to completely hide the first column. This happens if the value of this parameter is set to «-» (minus symbol). To insert the list of main results at another position, the printout statement «?», i.e. the question mark without any additions, can be used. For example, modifying the example above to display the city name after Population,

{{#ask: [[Category:City]] [[Located in::Germany]]
 | ?Population=Number of inhabitants
 | ?=City
 | mainlabel=-
 | limit=3
}}

This results in the table:

Result formats

The parameter format determines how the results of a query are displayed in the article. If it is omitted, all queries are displayed as tables (format table), unless there would be only one column, in which case the results are displayed as a comma-separated list (format list). The following formats are available in SMW by default:

Format	Description	Additional parameters (usually optional)
list	Comma-separated list, with additional outputs shown in parentheses	sep, template
ol	Ordered list, with additional outputs shown in parentheses	sep, template
ul	Bulleted list, with additional outputs shown in parentheses	sep, template
table	Tabular output
broadtable	Tabular output, where the table is as wide as the article.
timeline	Use dates in the output to print a timeline.	timelinestart, timelineend, timelinesize (default "300px"), timelinebands, timelineposition (default "middle")
eventline	Unstable. Use dates in the output to print a timeline that shows more than two dates per article.	timelinestart, timelineend, timelinesize (default "300px"), timelinebands, timelineposition (default "middle")
embedded	Embed selected articles.	embedonly (if set, don't show article link), embedformat (can be ol, ul, h1, h2 ..., h6)
template	Print results by passing result fields as parameters to a given template.	template (mandatory)
count	Just the number of results (a count of the number of matching pages), instead of the results themselves
debug	Debugging information for analysing problems in query answering.
rss	Print links to RSS feeds for query results.	rsstitle, rssdescription
icalendar	Print links to iCalendar export of query results.	icalendartitle, icalendardescription
vcard	Print links to vCard export of query results.
googlebar	A bar chart comparing numerical results	width (optional)
googlepie	A pie chart showing shares	width (optional), height (optional)

Using templates for custom formatting

Some of the above result formats support the use of wiki template to fully control the display of an inline query. This works for the formats template, list, ol and ul. If a template is specified, all result «rows» are formatted using this template. The name of the template (without the initial «Template:») is given in the parameter template, so the query has the following general form:

 {{#ask: ... | format=template/list/ol/ul | template=templatename }}

For each result in an inline query, SMW then calls the specified template, where the result and printout values are used as numbered template parameters. So a query that would display three columns when formatted as a table, will set three template parameters. These values can then be used in the template in the normal way writing {{{1}}}, {{{2}}}, etc. Each parameter refers to one "field" or column in the results that would be displayed by the inline query for each selected page. Normally the first field a query displays is the page title (see #Changing the first result column), so parameter {{{1}}} is the page title, and {{{2}}}, {{{3}}}, ... are the other properties displayed by the query. A number of examples are given below.

The template feature allows greater flexibility in the display of the query, including:

• Changing the order in which output is displayed, or omitting or duplicating output;
• Displaying images depending on query results;
• Creating links for property values;
• Using CSS styles to vary font-size, alignment, background-color, etc. by column in tables.

To understand how to create a template for formatting some query, it is useful to look at the query with format=table first. For example, queries that refer to a single page only (like the ones one would use with #show) hide the page title of the result page, so that the parameter {{{1}}} refers to the first printout statement. Using the printout statement ? or specifying any value for mainlabel willchange this.

{{#ask: [[Category:City]] [[Area::+]] [[Population::+]] 
  | ?Population=Inhabitants
  | ?Area#km²=Size in km²
  | format=template
  | template=Query output demo
  | limit=3
}}

Result:

In the above example you can see how the template ignores any header labels specified in the query such as «Size in km²». Yet the values the template displays do use the units specified in ?Area#km²=Size in km², and will similarly respect all given display formats (see Help:Displaying information).

Below is a similar query sorted by population that uses format=ol to produce a numbered list.

{{#ask: [[Category:City]] [[Area::+]] [[Population::+]] 
  | ?Population
  | ?Area#km²
  | format=ol
  | template=Query output demo
  | limit=3
  | sort=population
  | order=desc
}}

Result:

If we directly specify a single page, then normally the query results do not include the page, so to reuse the same template in the query below we must tell the query to display the page title as the first column by adding |?

{{#ask: [[Berlin]]
  | ?
  | ?Population
  | ?Area#km²
  | format=template
  | template=Query output demo
}}

Result:

The same can be accomplished using #show even though this may not be the most typical use of this function:

{{#show: Berlin
  | ?
  | ?Population
  | ?Area#km²
  | format=template
  | template=Query output demo
}}

Result:

Templates may also include other parser functions such as conditionals and even queries. Examples of complex query formats can be found on the following pages (external links, may change):

• Upcoming events on semanticweb.org's Main Page: the events section on this page displays only certain major events. Each such event is formatted with a template that uses another inline query to find sub-events (co-located workshops, tutorials, etc.) for a given event.
• Publications on korrekt.org: all lists on this page are created with templated queries. Conditionals (#if and #ifeq) are used to change the format of a result depending on its publication type and provided data (majorpublications have bold-faced titles).