SUSU Antenna Array

This page describe the plan to build a new antenna array to mount back on the mast on the West Building (outside the Stag's Head). This would be of benefit to SUWS as well as other societies listed below.

Facebook Group

Current Status

Currently in purchasing and refurbishment stage as well as final planning on assembly and connections

Interested Parties

SUWS (us) - General Amateur Radio operation / tracking high altitude balloons.
Space Flight Society
- Interested in helping us.
- Interested in tracking satellite / high altitude balloons
SUSUtv
- Interested in directional Wi-Fi for live campus broadcast
Surge
- Interested in properly fixing their FM antenna
Astronomy
- Interested in 1GHz-2GHz (?) radio astronomy.
ECS Sensor Network Research
- 868Mhz omni for sensor network node
There is still room for other interest should there be any

Antenna/Feature Ideas

Confirmed

HF beam dipole
triband 2m/70cm/6m omni
70cm+2m on dual-axis rotator
SURGE FM broadcast antenna
SOWN Wi-Fi @ coordinates
868 sensor net antenna on spur

Sensible

23cm on spur
radio telescope (astrosoc)
monitoring node (temp/wind ect)

Current Plan

From top of the mast to bottom.

6m/2m/70cm collinear (AR+satellites+HABs)

Spur bar
- FM Broadcast antenna (SURGE)
- 2.4GHz omni (sensor networks)
- 868 MHz omni (sensor networks)

Elevation rotator
- 2m Crossed Yagi (AR+satellites)
  - eg. 8-ele Tonna
- 70cm Crossed Yagi (AR+satellites+HABs)
  - eg. 19-ele Tonna (probably too long)
- 5GHz Wifi Dish (SOWN+SUSUTV)
  - eg. 802.11ac Ubiquiti PowerBeam

HF Dipole (AR)

Azimuth Rotator

Kit

Arrived and reimbursed

Arrived awaiting reimbursment

Dual axis Rotator
- Link [1]
- Price: £40
- Ordered By: M0NSA
- Budget: mast

Ordered

2m crossed yagi
- Link [[2]]
- Price: £89.95 + £4.99
- Date ordered: 2014-04-18
- Ordered by: TylerWard
- Budget: mast

Triband Vertical
- Link [3]
- Price: £87.95
- Date ordered: 2015-04-18
- Ordered by: TylerWard
- Budget: mast

Approved

70cm Yagi
- Link [[4]]
- Price: £52.96 + £10
- Date to be ordered: ASAP (Waiting on ML&S order)
- Budget: mast

Awaiting Approval

Ubiquity Powerbeam PBE-M5-400
- Link [5]
- Price £77.34 (inc. VAT)
- To be approved/ordered: ASAP
- Budget: mast

Screws For Rotator (M6*20)
- Link [6]
- Price £5.03
- To be approved/ordered: ASAP
- Budget: mast

Planned but not ready for approval

SSD for APU
- Link [[7]]
- Price £34.81
- Date to be ordered: Later
- Budget: to be decided

Vertical mast section
- Link [8]
- Price £52.95 (Inc. VAT)
- Date to be ordered: Later (confirm appropriate length)
- Budget: mast

Horizontal mast section
- Link [9]
- Price £34.95 (Inc. VAT)
- Date to be ordered: Later (confirm appropriate length)
- Budget: mast

Parts known to be needed

Mounting hardware
Rack cupboard
Dual axis Rotator Parts
- semi perminent loctite (blue i think)
- Rotator to pole bracket (we are short one) (potentially [10])
- SUSU_Antenna_Array/rotator
Internal patch panel parts
- panel [11]

Parts for HF dipole

Coax parts
- coax
- connectors

connection plate
- ?* weatherproof N through connectors [[12]]
- ?* N blanking plates
- Mounting frame (suggest stainless or aluminium)
- Connector box [[13]]
  - 2* ethercon panel connectors [[14]]
  - 2* XRL7 male panel [[15]]
  - 2* XLR7 female panel [[16]]
  - 2* ethercon cable [[17]]
  - 2* XLR7 female cable [[18]]
  - 2* XLR7 male cable [[19]]
  - potting compound [[20]] / lots of silica gell
  - D connector mounting plate [[21]]
  - weatherproofing ans sealant [[22]]

Coax Info

Information sourced from Coax Data and ML&S

Prices sourced from ML&S inc. VAT

	Diameter	RF Loss	Max Power Handling	Cost	Datasheet
	mm	dB/100ft @ 400MHz	W @ 50MHz (1:1 SWR)	/25m Reel
RG-58	5	10.5	450W	£20.70
RG-213	10.3	4.5	1500W	£32.25	http://www.romkatel.ro/cataloage/pdf/eupen/RG213.pdf
Ultraflex 7	7.3	3.59	1820W	£29.70	http://www.messi.it/dati/immagini/RGAC7PLUS-All1_EN.pdf

Note: Connectors for Ultraflex 7 are uncommon, and so may add significantly to the expense.