Tunable Dipole: Difference between revisions

From SUWS-wiki
Line 14: Line 14:


===Construction Method===
===Construction Method===
* Drill Holes
** 2 x 11mm holes each opposite each other, approximately 5cm from the end of one side of the 34mm PVC Tube
** 2 x 5mm holes separated enough to wrap a number of coils of coax around the PVC tube.
** 1 x 5mm hole in endcap.
* Assembly
** Screw in BNC sockets to top two holes nearest the end of the PVC tube (the Top).
** Thread coax through top 5mm hole. Strip coax and solder shield to one BNC socket, and core to the other.
** Wrap RG58 around the PVC tube and thread coax through the second 5mm hole back into and out the bottom of the tube.
** Thread coax through endcap.
** Attach bottom endcap to PVC tube.
** Solder BNC Male (or other suitable connection) to Coax.
** Install BNC Telescopic antennae
** Test antenna
** Attach top endcap.

Revision as of 18:25, 8 February 2018

Tunable Dipole
[[File:|250px|Tunable Dipole]]
Status New
Project Lead User:Stealthbird97

Tunable Dipole

Tunable dipole for use in foundation training.


Parts List

  • PVC Tube
  • 2x BNC Socket
  • 2x BNC Telescopic Antenna
  • RG-58
  • BNC Male Connector (or another suitable connector)

Construction Method

  • Drill Holes
    • 2 x 11mm holes each opposite each other, approximately 5cm from the end of one side of the 34mm PVC Tube
    • 2 x 5mm holes separated enough to wrap a number of coils of coax around the PVC tube.
    • 1 x 5mm hole in endcap.
  • Assembly
    • Screw in BNC sockets to top two holes nearest the end of the PVC tube (the Top).
    • Thread coax through top 5mm hole. Strip coax and solder shield to one BNC socket, and core to the other.
    • Wrap RG58 around the PVC tube and thread coax through the second 5mm hole back into and out the bottom of the tube.
    • Thread coax through endcap.
    • Attach bottom endcap to PVC tube.
    • Solder BNC Male (or other suitable connection) to Coax.
    • Install BNC Telescopic antennae
    • Test antenna
    • Attach top endcap.