Tunable Dipole: Difference between revisions
From SUWS-wiki
(Added Images) |
No edit summary |
||
| Line 4: | Line 4: | ||
|Project Lead=User:Stealthbird97 | |Project Lead=User:Stealthbird97 | ||
|Description= Tunable dipole for use in foundation training. | |Description= Tunable dipole for use in foundation training. | ||
|Image=Tunable_Dipole.jpg | |||
}} | }} | ||
Revision as of 21:29, 12 April 2018
| Tunable Dipole | |
|---|---|
| |
| Status | New |
| Project Lead | User:Stealthbird97 |
Tunable Dipole
Tunable dipole for use in foundation training.
Parts List
- PVC Tube
- 2x BNC Socket
- 2x BNC Telescopic Antenna
- RG-58
- BNC Male Connector (or another suitable connector)
Construction Method
- Drill Holes
- 2 x 11mm holes each opposite each other, approximately 5cm from the end of one side of the 34mm PVC Tube
- 2 x 5mm holes separated enough to wrap a number of coils of coax around the PVC tube.
- 1 x 5mm hole in endcap.
- Assembly
- Screw in BNC sockets to top two holes nearest the end of the PVC tube (the Top).
- Strip the outer of the coax so the core and shield can reach the two BNC connectors.
- Thread coax through top 5mm hole.
- Solder shield to one BNC socket, and core to the other.
- Wrap coax around the PVC tube and thread coax through the second 5mm hole back into and out the bottom of the tube.
- Thread coax through endcap.
- Attach bottom endcap to PVC tube.
- Solder BNC Male (or other suitable connection) to Coax.
- Install BNC Telescopic antennae
- Test antenna
- Attach top endcap.
