Tunable Dipole: Difference between revisions
From SUWS-wiki
No edit summary |
|||
| Line 19: | Line 19: | ||
** 2 x 5mm holes separated enough to wrap a number of coils of coax around the PVC tube. | ** 2 x 5mm holes separated enough to wrap a number of coils of coax around the PVC tube. | ||
** 1 x 5mm hole in endcap. | ** 1 x 5mm hole in endcap. | ||
[[File:Tunable_Dipole_Diagram-01.svg]] | |||
* Assembly | * Assembly | ||
Revision as of 20:48, 12 April 2018
| Tunable Dipole | |
|---|---|
| [[File:|250px|Tunable Dipole]] | |
| Status | New |
| Project Lead | User:Stealthbird97 |
Tunable Dipole
Tunable dipole for use in foundation training.
Parts List
- PVC Tube
- 2x BNC Socket
- 2x BNC Telescopic Antenna
- RG-58
- BNC Male Connector (or another suitable connector)
Construction Method
- Drill Holes
- 2 x 11mm holes each opposite each other, approximately 5cm from the end of one side of the 34mm PVC Tube
- 2 x 5mm holes separated enough to wrap a number of coils of coax around the PVC tube.
- 1 x 5mm hole in endcap.
File:Tunable Dipole Diagram-01.svg
- Assembly
- Screw in BNC sockets to top two holes nearest the end of the PVC tube (the Top).
- Thread coax through top 5mm hole. Strip coax and solder shield to one BNC socket, and core to the other.
- Wrap RG58 around the PVC tube and thread coax through the second 5mm hole back into and out the bottom of the tube.
- Thread coax through endcap.
- Attach bottom endcap to PVC tube.
- Solder BNC Male (or other suitable connection) to Coax.
- Install BNC Telescopic antennae
- Test antenna
- Attach top endcap.
