Morse sounder: Difference between revisions

Revision as of 22:10, 5 March 2017

To design a morse code sidetone generator. The finished version of which will be made into a kit that can be used as an intermediate project.

@@ Line 4: / Line 4: @@
 |Project Lead=User:TylerWard
 |Description=To design a morse code sidetone generator. The finished version of which will be made into a kit that can be used as an intermediate project.
+|Image=MorseSounderSetRender.jpg
 }}
 === Tasks ===
@@ Line 21: / Line 22: @@
 * estimated cost £25-30 (with keyer) £20-£25(without keyer)
-=== Planned Feature List ===
+=== Feature List ===
-==== Essential ====
-*1/4in jack key input
-*internal speaker
-*battery powered
-==== Improvements ====
+* 1/4in jack key input
+* internal speaker
+* battery powered
 * Paddle key support
-** requires microntroler control
+* Tone/Volume/weight/rate Dials
-** additional settings required
+* 1/4in Headphone Jack
-* Tone Dial
-* Headphone Jack
 * 12v input
-* volume control
+* Included iambic key
-=== Design planning ===
-* IO Interfaces plan
-** 1/4 jack for key input
-** 1/4 jack for Headphone output
-** dual potentiometer for tone/volume select
-** dual potentiometer for rate/weight setting
-** 2.5mm jack / powerpoles for power input
-** switch for keyer/straight operation
-** Internal 40*20mm speaker
 === Notes ===
@@ Line 57: / Line 40: @@
 * [http://www.digikey.co.uk/product-search/en?keywords=P082D potential vol/tone dial]
 * [http://onecall.farnell.com/hammond/1593pbk/case-abs-black-28x65x90mm/dp/930209?ost=1593PBK potential case]
-*Obtained chip data sheet
-*Circuit board design making progress
-*PCB and schematic done