Powerpole Distribution: Difference between revisions
From SUWS-wiki
| Line 7: | Line 7: | ||
=== Interested parties === | === Interested parties === | ||
* Tyler | * Tyler * 2 | ||
* Henry | * Henry | ||
* Phil | * Phil | ||
Revision as of 10:33, 22 March 2016
Powerpole Distribution Box Project
Interested parties
- Tyler * 2
- Henry
- Phil
- morse
Feature List
- 6 power-pole breakout with individual fuses
Costings
| Type | Item | Cost | Link |
|---|---|---|---|
| connector | 12*45A pcb contacts | £9.90 for 15 | [1] |
| connector | 6* red 45A housings | £2.65 for 10 | [2] |
| connector | 6* black 45A housings | £2.65 for 10 | [3] |
| Fuseholder | Keystone 3522-2 | £0.43 each (£2.58) | [4] |
| Resistor | 220ohm though hole 0.25w | £0.29 for 10 | [5] |
| LED | 3mm red | £0.46 for 10 | [6] |
| PCB | 5*10cm | $24 for 10 or ($2.4 each) | [dirtypcbs.com] |
Total cost: ~ £25 each without case a full order of 10 (or another nice multiple) should bring the cost down to around 20 with a case
Using 45A crimp contacts on thick wire can probably bring the cost down to about £20.
