SUSU Antenna Array: Difference between revisions
From SUWS-wiki
(→Kit) |
|||
Line 102: | Line 102: | ||
** Price: £52.96 + £10 | ** Price: £52.96 + £10 | ||
** Date to be ordered: ASAP (Waiting on ML&S order) | ** Date to be ordered: ASAP (Waiting on ML&S order) | ||
** Budget: mast | ** Budget: mast | ||
Revision as of 11:04, 20 April 2015
This page describe the plan to build a new antenna array to mount back on the mast on the West Building (outside the Stag's Head). This would be of benefit to SUWS as well as other societies listed below.
Current Status
- Currently in purchasing and refurbishment stage as well as final planning on assembly and connections
Interested Parties
- SUWS (us) - General Amateur Radio operation / tracking high altitude balloons.
- Space Flight Society
- Interested in helping us.
- Interested in tracking satellite / high altitude balloons
- SUSUtv
- Interested in directional Wi-Fi for live campus broadcast
- Surge
- Interested in properly fixing their FM antenna
- Astronomy
- Interested in 1GHz-2GHz (?) radio astronomy.
- ECS Sensor Network Research
- 868Mhz omni for sensor network node
- There is still room for other interest should there be any
Antenna/Feature Ideas
Confirmed
- HF beam dipole
- triband 2m/70cm/6m omni
- 70cm+2m on dual-axis rotator
- SURGE FM broadcast antenna
- SOWN Wi-Fi @ coordinates
- 868 sensor net antenna on spur
Sensible
- 23cm on spur
- radio telescope (astrosoc)
- monitoring node (temp/wind ect)
Current Plan
From top of the mast to bottom.
- 6m/2m/70cm collinear (AR+satellites+HABs)
- Spur bar
- FM Broadcast antenna (SURGE)
- 2.4GHz omni (sensor networks)
- 868 MHz omni (sensor networks)
- Elevation rotator
- 2m Crossed Yagi (AR+satellites)
- 70cm Crossed Yagi (AR+satellites+HABs)
- 5GHz Wifi Dish (SOWN+SUSUTV)
- HF Dipole (AR)
- Azimuth Rotator
Kit
Arrived and reimbursed
Arrived awaiting reimbursment
Ordered
- 2m crossed yagi
- Lithium Grease 500g
Approved
- 70cm Yagi
- Link [[4]]
- Price: £52.96 + £10
- Date to be ordered: ASAP (Waiting on ML&S order)
- Budget: mast
- Screws For Rotator (M6*20)
- Link [5]
- Price £5.03
- To be approved/ordered: ASAP
- Budget: mast
- Loctite 243 (for securing the bolts)
- [6]
- Price 7.76+vat
- To be approved/ordered: ASAP
- Budget: mast
Awaiting Approval
Planned but not ready for approval
- SSD for APU
- Link [[7]]
- Price £34.81
- Date to be ordered: Later
- Budget: to be decided
- Vertical mast section
- Link [8]
- Price £52.95 (Inc. VAT)
- Date to be ordered: Later (confirm appropriate length)
- Budget: mast
- Horizontal mast section
- Link [9]
- Price £34.95 (Inc. VAT)
- Date to be ordered: Later (confirm appropriate length)
- Budget: mast
Parts known to be needed
- Mounting hardware
- Rack cupboard
- Dual axis Rotator Parts
- semi perminent loctite (blue i think)
- Rotator to pole bracket (we are short one) (potentially [10])
- SUSU_Antenna_Array/rotator
- Internal patch panel parts
- panel [11]
- Parts for HF dipole
- Coax parts
- coax
- connectors
- connection plate
Coax Info
Information sourced from Coax Data and ML&S
Prices sourced from ML&S inc. VAT
Diameter | RF Loss | Max Power Handling | Cost | Datasheet | |
---|---|---|---|---|---|
mm | dB/100ft @ 400MHz | W @ 50MHz (1:1 SWR) | /25m Reel | ||
RG-58 | 5 | 10.5 | 450W | £20.70 | |
RG-213 | 10.3 | 4.5 | 1500W | £32.25 | http://www.romkatel.ro/cataloage/pdf/eupen/RG213.pdf |
Ultraflex 7 | 7.3 | 3.59 | 1820W | £29.70 | http://www.messi.it/dati/immagini/RGAC7PLUS-All1_EN.pdf |
Note: Connectors for Ultraflex 7 are uncommon, and so may add significantly to the expense.